Home > News Center

News Center

  • Latest exhibition photos

    2019-12-30 17:50:05
  • Latest exhibition photos

    2019-10-28 17:38:02
    Latest exhibition photos
  • South Africa customer visited our factory, we signed total 2 millions of dollars orders in 2018 year

    2019-07-23 08:37:53
  • Factory

    2019-07-23 08:20:51
  • SHASHI Auto Parts Factory sales'volume up to 5 Millions USD with kinds of products exporting to World markets in 2019

    2019-07-22 16:39:58
  • Why change the valve when changing tires?

    2019-07-17 17:10:05
    In the long-term operation and high-speed operation of the automobile, there are often some failures, such as anchoring, car puncture, component damage, etc. When these faults occur, they can be properly maintained and maintained during normal use. Regular maintenance to reduce the occurrence of faults.
  • What is the advantage of nitrile gloves, how to choose nitrile gloves correctly

    2019-07-17 17:05:04
    Disposable nitrile gloves are gloves made of different synthetic rubbers. It does not contain any latex protein and has excellent abrasion resistance. Nitrile gloves are more resistant to puncture than many other types of rubber gloves and can be used to combat corrosion from many types of chemicals. Nitrile gloves are often considered to be the strongest type of disposable gloves, and nitrile gloves are the best choice for those who are allergic to latex.
  • Where should the car jack be placed?

    2019-07-17 16:58:23
    Where should the car jack be placed? Xiaobian analysis is as follows;The jacks equipped with the car are respectively supported on the metal ribs on the lower side of the left and right sides of the vehicle. There are grooves or triangular marks on the metal ribs. Of course, the insurance method is to check the manual of the vehicle, which will detail the jack. Use method and vehicle safety support location.
  • Car jack, do you really use it?

    2019-07-17 16:52:13
    Vehicle puncture is a very troublesome thing. Many people know that they need to use the on-board tool-jack to replace the spare tire, but many drivers don't know how to use it accurately. Today, Xiaobian will teach you how to use it accurately jack.
  • Precautions for the use of car jacks

    2019-07-17 16:45:59
    The car jack is placed inside the car's toolbox and is used to lift the car body when replacing the spare tire. Automobile jacks have pneumatic jacks, electric jacks, hydraulic jacks and mechanical jacks. Hydraulic and mechanical jacks are commonly used. The car jack is used to replace the spare tire, and the car is broken when the car is broken.
  • Balance block fixing method

    2019-07-17 16:33:40
    The balance block is the basic material used for wheel balance block correction. According to the fixed type of the balance block, it can be divided into two types: hook type and paste type. Among them, according to the quality, it is divided into several specifications of different sizes, including 5g, 10g, 15g, 20g, etc., and the gauge interval of the balance block is usually 5g.
  • Introduction of tire repair strips

    2019-07-17 16:24:25
    The tire patch is a strip of colloid used to bond, repair or glue the tire to the tread.The role of the tire-filling strip: the unique cold-resistant and heat-resistant process formula, with excellent air-tight performance, so that the repaired tire can adapt to various road environments around the clock, effectively improve the wear rate and service life of the tire retreading, and at the same time Refurbished tires and beautiful.
  • How to repair tires with film

    2019-07-17 16:18:58
    1. Clean the holes with an air mold grinder. Choose a tip that will fit the hole in which it leaks. This will roughen the sides and clean the area so that the patches will bond properly when installed.2. Replace the drill bit on the mold grinder with a grindstone drill bit. Spray "Pre-Buff Cleaner" on the inside of the tire and the patch will be installed.
  • Matching, use and installation method of hook type balance block warranty equipment

    2019-07-17 16:06:44
    In recent years, due to the sharp increase in car ownership, and the tire warranty has been incorporated into the car maintenance enterprise opening management regulations, the heat of the car iron-linked balance block maintenance and maintenance market is gradually heating up.
  • The importance and standard of the adhesive balance block in the car driving

    2019-07-17 15:59:35
    The sticking weights of each wheel vary in size, but there must be a sticking weight. Some of the wheel's adhesive weights are on the outside of the wheel, but most of the wheel's adhesive weights are on the inside of the wheel, making it difficult to find the adhesive weight from the outside.
  • Valve maintenance method and sealing

    2019-07-17 15:51:06
    The valve body has a valve core acting on the one-way valve, and the inner hole of the valve is closed by a valve cap from the outside to prevent the inner hole of the main body from being clogged and the inner tube leaking. For the valve cap of the metal valve, the wrench can be screwed in and out of the valve core. In addition, the metal type, the valve is also equipped with a bridge pad and a compression nut to improve the bonding strength of the inner tube and the valve.
  • Installation and selection of car balance block

    2019-07-17 15:28:41
    The car balance block is a counterweight component on which the vehicle is mounted on the wheel. The function of the counterweight is to keep the wheel in dynamic balance under high speed rotation. The quality of any part of the object itself is different. Under static and low-speed rotation, the uneven quality will affect the stability of the rotation of the object. The higher the rotation speed, the greater the vibration.
  • What are the methods for repairing tires?

    2019-07-17 15:19:59
    Common tire repair methods using tire repair tools to repair tires:According to the usual work experience, the tire repair method for bad tires can be roughly divided into three types according to the degree of tire damage: cold (internal or paste), hot (commonly known as fire) and rubber strip.
  • The characteristics and production process of lead-type hook-type balance block

    2019-07-17 15:09:15
    The characteristics and production process of lead-type hook-type balance block First, the lead-type hook-type balance block has passed ISO9001-2002 quality system certification, customers can use with confidence.Second, the lead-type hook-type balance block is made of standard lead and the quality is recognized.
  • Wheel balance weight balance test

    2019-07-17 15:02:10
    The quality of any part of the object itself is different. Under static and low-speed rotation, the uneven quality will affect the stability of the rotation of the object. The higher the rotation speed, the greater the vibration. As we all know, with the improvement of road conditions in China and the rapid development of automobile technology, the speed of vehicles is getting faster and faster.
Altogether 35 article, Every page shows:20 article
Anqing Zifeng Tower, Yingjiang District,Anqing City,Anhui Province
Call us:+86-15505083202